Knowledge base
1000 FAQs, 500 tutorials and instructional videos. Here, there are only solutions!
Restart a Cloud VPS / Lite VPS (including safe mode)
This guide explains how to restart an Infomaniak VPS Cloud / VPS Lite and what you can do if you no longer have access to the server.
Reboot VPS Cloud / VPS Lite
The classic mode allows you to restart your server normally. To access the VPS Cloud / VPS Lite:
- Click here to access the management of your product on the Infomaniak Manager (need help?).
- Click directly on the name assigned to the product in question.
- Click on the Manage button.
- Click on Restart (classic mode):

Enable/disable safe mode
If you have lost your SSH key, or made a configuration error, etc.
You have the possibility to restart in rescue mode. This consists of restarting from a base image from which you can mount the partitions of your cloud. In this way, you will be able to modify/repair your configuration.
Warning: depending on the operating system installed, the system volume may be named /dev/sda, /dev/sda1 or /dev/vda; the same for the data volume /dev/sdb, /dev/sdb2 or /dev/vdb! It is therefore necessary to replace these indications with those corresponding to your situation.
To activate rescue mode:
- Click here to access the management of your product on the Infomaniak Manager (need help?).
- Click directly on the name assigned to the product in question.
- Click on the Manage button.
- Click on Restart (safe mode):

Warning: Your data disk is not accessible when your VPS Cloud / VPS Lite is in safe mode. Only the system disk is accessible.
Perform operations
Once safe mode is active, access your Cloud via SSH, either with your ssh key, or with the temporary password available in the interface.
Once connected, switch to root user:
sudo -iThen list the available partitions (replace ov-abcd with your hostname):
[root@ov-abcd ~]# lsblk
NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT
vda 253:0 0 8G 0 disk
└─vda1 253:1 0 8G 0 part /
vdb 253:16 0 20G 0 disk
└─vdb1 253:17 0 20G 0 partvdb corresponds to the disk of your cloud (your usual system to repair).
To access it in write mode, you must mount it:
[root@ov-abcd ~]# mount /dev/vdb1 /mnt/You can then modify the files on your disk:
[root@ov-abcd ~]# ls /mnt/
bin boot dev etc home lib lib64 lost+found media mnt opt proc root run sbin srv sys tmp usr varDepending on the operating system of your cloud, you can also perform a chroot to work directly in your usual environment:
[root@ov-abcd ~]# chroot /mnt/
root@ov-abcd:/# export PATH="$PATH:/usr/sbin:/sbin:/bin"
root@ov-abcd:/# lsOnce the necessary modifications have been made, deactivate safe mode from the Manager to restart your cloud on the original disk.
Link to this FAQ:
Has this FAQ been helpful?