Knowledge base
1000 FAQs, 500 tutorials and explanatory videos. Here, there are only solutions!
Syncing QNAP with kDrive
This guide provides instructions for synchronizing kDrive with a Qnap NAS (or vice versa) via the WebDAV protocol found in the HBS 3 Hybrid Backup Sync application.
Prerequisites
- Have a Qnap NAS accessible from the Internet
- Have a paid kDrive subscription
- Know your kDrive identifier (IDkDrive):
- Log in to your kDrive (https://kdrive.infomaniak.com/)
- The address displayed at the top in your browser contains a number: kdrive.infomaniak.com/app/drive/123456/
- This number (in the example 123456) is your kDrive identifier (IDkDrive)
- So, you will need to write https://IDkDrive.connect.kdrive.infomaniak.com whenever necessary (
https://123456.connect.kdrive.infomaniak.com
, for example, as the WebDAV address)
Synchronize kDrive and Qnap via HBS 3
For this:
- Log in to the administration interface of the Qnap NAS (QTS)
- If necessary, download and install the HBS 3 Hybrid Backup Sync app
- Open HBS 3
- Go to Sync from the left menu
- Create a synchronization task (Two-way Sync Job)
- Choose WebDAV from the list of Cloud providers
- For account settings, use the following information:
- Server address: https://IDkDrive.connect.kdrive.infomaniak.com (read the prerequisites above)
- Username: your Infomaniak account username
- Password: your Infomaniak account password or an application password (in case of 2FA)
- Choose the local and destination folders
- Customize the task frequency
- Finish the wizard
Link to this FAQ: