Knowledge base
1000 FAQs, 500 tutorials and explanatory videos. Here, there are only solutions!
Set up DynDNS for Qnap
This guide explains how to access a Qnap NAS connected to the Internet with a dynamic IP address via a domain name.
Prerequisites
- Have a Qnap NAS connected to the Internet with a dynamic IP address.
- A dynamic DNS must have been created on the relevant domain.
Linking a Qnap NAS to a domain name
To do this:
- Open the management interface of the Qnap NAS.
- Go to Network & Virtual Switch:
- Click on Add under Access Services > DDNS:
- Enter the following information:
- DDNS Server:
Custom
- Profile name:
Infomaniak
(or whatever you want) - Username:
the identifier
defined in the Manager when adding the Dynamic DNS - Password:
the password
set in the Manager when adding the Dynamic DNS - Hostname:
the URL
configured in the Manager when adding the Dynamic DNS - URL :
https://infomaniak.com/nic/update?hostname=%HOST%&myip=%IP%
- Click on Apply.
From this point on, the dynamic IP address of your NAS will be automatically synchronized with your domain name.
Make your life easier! If needed, **local partners recommended by Infomaniak can handle these procedures**. Launch a **free tender**. They take care of everything, freeing you from the technical details.
Link to this FAQ: